![]() Its probably not a good long term solution but should at least allow you to get up and running while the problem with the rotating hard drives is investigated. Revision History Revision Revision History Date-001 First release of the Intel Desktop Board DG41RQ Product Guide December 2008 If an FCC declaration of conformity marking is present on the board, the followi ng statement applies: FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Which will write the startup output to a file d.txt/ Then type control-D to exit the shell, then use options 1 and 2 to configure interfaces and LAN address so you can ftp d.txt to another machine and from there post it as a reply to this topic so we have a bit more information to work with.Īnother option: if you plug in a USB flash drive before booting from the CD its possible it will be detected as a hard drive and you may be able to install there. Intel® Processor Identification Utility Goes off the Screen and Cannot Be Fully Seen While in Normal Window. Intel BLKDG41RQ - Bulk Single Uatx G41 Exp Chip Manual Online: setting the bios configuration jumper, Jumper Settings For The Bios Setup Program Modes. ![]() ![]() If you get to that point but there is no option 99 displayed I suggest you select option 8 (to get to the shell prompt) then type the command dmesg > d.txt Then I booted that CD (note you have to select a FreeBSD boot option or wait a few seconds for it to proceed automatically) and after asking a couple of configuration questions I got the long menu displayed (similar to the one I referred to earlier) and that included option 99 to install to hard drive. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |